Sony STR-DN1080 Operating Instructions - Page 45

To exit zone operation, For main zone, For Zone 2, For HDMI zone, Available inputs for each zone

Get Sony STR-DN1080 PDF manuals and user guides View all Sony STR-DN1080 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Listening/Watching 6 Adjust the volume using the volume control on the amplifier or TV in HDMI zone. Tip  You can avoid possible interference to the signals in main zone by setting [Priority] to [Main Only] in the [HDMI Settings] menu. However, if the same input is selected in HDMI zone, there will be no video or audio output from HDMI zone. For details on the setting, refer to "Setting the priority for the main zone (Priority)" in Help Guide.  The HDMI OUT B/HDMI ZONE jack supports bandwidths up to 9 Gbps if [HDMI Out B Mode] is set to [Zone] in the [HDMI Settings] menu. To exit zone operation Set [HDMI Zone Power] to [Off] in step 4. Available inputs for each zone Available inputs vary depending on the zone you have selected. Select the input you want on TV screen or display panel. For details on the available inputs, refer to "Available inputs for each zone" in Help Guide. For main zone You can select all input source from every device connected to the receiver in the main zone. For Zone 2 You cannot watch video in Zone 2. Sound is not available from devices connected to the HDMI IN jacks. Note  Signals from the HDMI IN, OPTICAL IN and COAXIAL IN jacks cannot be output to the speakers in Zone 2.  You can select either [USB], [Home Network], [Music Service List] or [Bluetooth] from the main zone and Zone 2. Priority is given to the choice which has most recently been selected, even if a different choice has already been selected in one of the zones.  If you connect BLUETOOTH headphones to the main zone while a connected device is playing and the current input in Zone 2 is [USB], [Home Network] or [Music Service List], the input for Zone 2 will change to [SOURCE]. In this case, only FM tuner and analog audio signal are output to Zone 2.  If you connect BLUETOOTH headphones to the main zone while a connected device is playing, the BLUETOOTH headphones will be disconnected if you select [USB], [Home Network] or [Music Service List] in Zone 2.  If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or [Home Network] are output to the Zone 2 speakers. For HDMI zone You can only watch video or listen to audio input from the HDMI IN jacks (except for VIDEO 1). 45GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
45
GB
Listening/Watching
6
Adjust the volume using the
volume control on the
amplifier or TV in HDMI zone.
You can avoid possible interference to the signals
in main zone by setting [Priority] to [Main Only] in
the [HDMI Settings] menu. However, if the same
input is selected in HDMI zone, there will be no
video or audio output from HDMI zone. For details
on the setting, refer to “Setting the priority for the
main zone (Priority)” in Help Guide.
The HDMI OUT B/HDMI ZONE jack supports
bandwidths up to 9 Gbps if [HDMI Out B Mode] is
set to [Zone] in the [HDMI Settings] menu.
To exit zone operation
Set [HDMI Zone Power] to [Off] in step 4.
Available inputs vary depending on the zone
you have selected. Select the input you want
on TV screen or display panel.
For details on the available inputs, refer to
“Available inputs for each zone” in Help
Guide.
For main zone
You can select all input source from every
device connected to the receiver in the main
zone.
For Zone 2
You cannot watch video in Zone 2. Sound is
not available from devices connected to the
HDMI IN jacks.
Signals from the HDMI IN, OPTICAL IN and COAXIAL
IN jacks cannot be output to the speakers in Zone
2.
You can select either [USB], [Home Network],
[Music Service List] or [Bluetooth] from the main
zone and Zone 2. Priority is given to the choice
which has most recently been selected, even if a
different choice has already been selected in one
of the zones.
If you connect BLUETOOTH headphones to the
main zone while a connected device is playing and
the current input in Zone 2 is [USB], [Home
Network] or [Music Service List], the input for Zone
2 will change to [SOURCE]. In this case, only FM
tuner and analog audio signal are output to Zone
2.
If you connect BLUETOOTH headphones to the
main zone while a connected device is playing, the
BLUETOOTH headphones will be disconnected if
you select [USB], [Home Network] or [Music Service
List] in Zone 2.
If you set [DSD Native] in [Audio Settings] to [On],
no audio signals for DSD content from [USB] or
[Home Network] are output to the Zone 2 speakers.
For HDMI zone
You can only watch video or listen to audio
input from the HDMI IN jacks (except for
VIDEO 1).
Tip
Available inputs for each zone
Note