Sony STR-DN1080 Operating Instructions - Page 61

This product contains software that is subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL. The source code for the software used in this product is subject to the GPL and LGPL, and is available on the Web. To download, please access the following: URL: http://oss.sony.net/Products/Linux Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code. Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA models only) With 6 ohm loads, both channels driven, from 20 Hz - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output. Amplifier section1) Minimum RMS Output Power (6 ohms, 20 Hz - 20 kHz, THD 0.09%) 100 W + 100 W Stereo Mode Output Power (6 ohms, 1 kHz, THD 0.9%) 120 W + 120 W Surround Mode Output Power2) (6 ohms, 1 kHz, THD 0.9%) 165 W per channel 1) Measured under the following conditions: Area Power requirements USA, Canada 120 V AC, 60 Hz Oceania, Europe 230 V AC, 50 Hz 2) Reference power output for front, center, surround and surround back speakers. Depending on the sound field settings and the source, there may be no sound output. Frequency response Analog 10 Hz - 100 kHz, +0.5/-2 dB (with sound field and equalizer bypassed) Input Analog Sensitivity: 500 mV/50 kilohms S/N3): 105 dB (A, 500 mV4)) Digital (Coaxial) Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Digital (Optical) S/N: 100 dB (A, 20 kHz LPF) Output (Analog) ZONE 2 Voltage: 2 V/1 kilohm SUBWOOFER Voltage: 2 V/1 kilohm 61GB Additional Information