Sony STR-GX90ES Operating Instructions / Mode d’emploi - Page 8
simultaneously
View all Sony STR-GX90ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the System 0 Connecting the Speakers Right speaker O elfO Left speaker 0930 2 15 mm O O 3 O O Receiver 0 to the second speaker system Ci 01111. 0114104100 SOOIII 041 0000 0000 Ell Set the SPEAKER IMPEDANCE SELECTOR according to the impedance of the used speakers, using a screwdriver SPEAKSERLEI CMTORPEDANCE 4 - 6111 r8 - 1611 CAUTION: When you operate two speaker systems simultaneously, be sure to use the speakers with the impedance of more than 8 ohms and set the SPEAKER IMPEDANCE SELECTOR to 4 - 652. Note Once the speakers have been connected, move SPEAKERS selector (on the front panel) to A, B or A + B setting. When using the headphones, set the SPEAKERS selector to OFF. Speaker impedance and power capability This receiver is designed to work best with speakers having nominal impedance from 4 to 16 ohms. Be sure to use a speaker system with adequate nominal impedance and power handling capabilities. Using AC outlets eceiver 0 O rn, PIM 0000 0000 7- Connect the AC power cord of each piece of equipment to the AC outlet on the receiver so that you can turn the equipment on and off using the receiver's POWER switch. Caution Be careful that the total power consumption of each piece of equipment connected to the outlets on the receiver does not exceed 100 watts. Do not connect electrical home appliances such as an electric iron, fan, TV, or other high-wattage equipment to these outlets.