Sony STR-ZA2100ES Installation Guide - Page 22
Using the hidden commands, Performing commands using the receiver
View all Sony STR-ZA2100ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Using the hidden commands Performing commands using the receiver This receiver allows you to perform various commands using buttons on the front panel. PING ENTER AMP MENU 2CH/DIRECT MULTI ST. Function User initialize (Memory Clear) Sound Field Clear Settings Lock Command mode (Remote Control) Operation Hold down for 5 seconds in standby mode. Hold down MULTI.ST. and press in standby mode. Hold down PING and AMP MENU and press ENTER while the receiver is turned on. Hold down 2CH/DIRECT and press in standby mode. Performing commands using the supplied remote control This receiver allows you to perform various commands using the supplied remote control. Changing the remote control code 1 While holding down MAIN, press MAIN . MAIN will start flashing. 2 Press CUSTOM PRESET 1 or 2 to select AV1 or AV2 as needed. MAIN will stop flashing and light up in red. 3 Press . MAIN will start flashing again. 4 Press again to set the command mode. 22US