Stihl FS 80 Instruction Manual - Page 27

English / USA Fitting the Carrying Eye Mounting the Deflector 002BA142 KN 002BA102 KN 002BA103 KN 1 1 2 1 3 2 3 4 4 1 5 : For position of carrying eye1) see "Parts and Controls" : Place the clamp (1) with the tapped hole on the left-hand side of the drive tube. : Squeeze the two ends of the clamp together and hold in that position. : Insert M 6 x 14 screw (2). : Line up the carrying eye. : Tighten down the screw firmly. Mounting the deflector 1 = Deflector approved for all cutting tools 2 = Deflector approved for use with mowing heads only : Place the deflector on the gearhead. : Fit the plate (3) and line it up. : Insert M 5 x 18 screws and tighten down firmly. Fitting skirt and blade These parts must be fitted to the deflector (1) when you use a mowing head: : Slide the lower guide slot of the skirt (4) onto the deflector (1) - it must snap into position. : Push the blade (5) into the upper guide slot on the skirt and line it up with the first hole. : Fit the screw and tighten it down firmly. 1) Included as standard or available as special accessory 26 FS 80, FS 80 R, FS 85, FS 85 R