Stihl FS 80 Instruction Manual - Page 37

For cold start to, For warm start to, firmly

Page 37 highlights

English / USA 8 8 002BA038 KN 393BA017 KN 357BA033 KN 002BA040 KN 393BA018 KN 9 : Set the choke knob (8): For cold start to g For warm start to e - also use this position if engine has been running but is still cold : Press fuel pump bulb (9) at least five times - even if the bulb is already filled with fuel. : Place the unit on the ground: It must rest securely on the engine support and deflector. Check that the cutting tool is not touching the ground or any other obstacles. : Make sure you have a firm footing. : Hold the unit with your left hand and press it down firmly - your thumb should be under the fan housing. Do not stand or kneel on the drive tube! : Pull the starter grip slowly with your right hand until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope to full length - it might otherwise break. : Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. : Continue cranking until engine runs. 36 FS 80, FS 80 R, FS 85, FS 85 R

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122

36
English / USA
FS 80, FS 80 R, FS 85, FS 85 R
:
Set the choke knob (
8
):
For cold start to
g
For warm start to
e
– also use this position if engine has
been running but is still cold
:
Press fuel pump bulb (
9
) at least five
times – even if the bulb is already
filled with fuel.
:
Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
:
Make sure you have a firm footing.
:
Hold the unit with your left hand and
press it down
firmly
– your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube!
:
Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope to full
length – it might otherwise break.
:
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
:
Continue cranking until engine runs.
393BA017 KN
8
8
393BA018 KN
9
002BA038 KN
002BA040 KN
357BA033 KN