Stihl FS 88 Instruction Manual - Page 24
Mounting, Handle
View all Stihl FS 88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Mounting the Loop Handle Version B ~0 4 5 3 ~6 8 ([JJ ([JJ 8 On FS 88 • Place the clamp (3) in the loop handle (1). • Place packing sleeve (5) on the drive tube (4). • Fit the clamp (6) line up the holes. • Insert screws (7) in holes and screw on the nuts (8) fingertight. • Align the loop handle. • Lock the nuts and tighten the screws firmly. • Mount the loop handle (1) 20 cm/8" (A) forward of the control handle (2). • Place the clamp (3) in the loop handle (1). On FS 88 • Place packing sleeve (5) on the drive tube (4). "'- On FS 108 • Place both parts on the drive tube (4). • Fit the clamp (6) and make sure that the holes line up. • Insert the screws (7) as far as stop. • Line up the loop handle and tighten the screws firmly. 23
~0
3
4
5
~6
8
([JJ
([JJ
8
On
FS 88
•
Place the clamp
(3)
in
the loop
handle (1).
•
Place packing sleeve
(5)
on the drive tube (4).
•
Fit the clamp
(6)
-
line up the holes.
•
Insert screws
(7)
in
holes and
screw on the nuts
(8)
fingertight.
•
Align the loop handle.
•
Lock the nuts and tighten
the screws firmly.
Mounting
the
Loop
Handle
Version B
•
Mount the loop handle
(1)
20 cm/8"
(A)
forward of the
control handle (2).
•
Place the clamp
(3)
in
the loop
handle (1).
On FS 88
•
Place packing sleeve
(5)
on the drive tube (4).
"'-
On FS 108
•
Place both parts on the
drive tube (4).
•
Fit the clamp
(6)
and make sure
that the holes line up.
•
Insert the screws
(7)
as far as stop.
•
Line up the loop handle and
tighten the screws firmly.
23