Stihl FS 88 Instruction Manual - Page 43
Lubricating, Gearbox, Drive, Shaft
View all Stihl FS 88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Lubricating Gearbox Lubricating Drive Shaft 34 5 t 01 10 2 • Remove the foam element (3) • and the felt element (4). Wash the filter elements in fresh, non-flammable cleaning solution (e.g. warm soapy water) and then dry. Replace damaged parts of filter. • Place the felt element in the filter base (5) first and then • the foam element. Fit the filter cover (1) - it must snap into position. • Check grease level after about •• every 50 hours of operation. Unscrew the filler plug (1). If no grease can be seen on the insi- de of the filler plug, screw the tube (2) of STIHL gear lubricant • 0781 120 1117 into the filler hole. Squeeze grease into the gear housing - about 5 - 10 g (1/4 oz), Do not completely fill the gear housing with grease. • Refit the filler plug and tighten it down firmly. • Check film of lubricant once a year. • Mark the end of the gear head on •• the drive tube. Release the clamp screws (1). Pull the gear head (2) off the drive tube. 42