Stihl FS 88 Instruction Manual - Page 25
Mounting, Deflector
View all Stihl FS 88 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Mounting the Deflector 1 3~ 4 Mounting the deflector • Place either deflector (1) for all cutting tools or deflector (2) for mowing heads on the gearhead flange. • Fit the plate (3) and line it up. • Insert M 5 x 18 screws and tighten down securely. Fitting skirt and blade • Slide the lower guide slot of the skirt (4) over the deflector (1) it must snap into position. • Push blade (5) into the upper gUide on the skirt and line it up with the first hole. • Fit the screw and tighten it down firmly. Fitting stop for circular saw blades • Remove standard deflector. Place the stop (1) on the gear head flange - fit the three M 5 x 18 screws (2) provided and tighten down securely. 24
Mounting
the
Deflector
1
3~
4
Mounting the deflector
•
Place either deflector
(1)
for all
cutting tools
or
deflector
(2)
for mowing heads
on the gearhead flange.
•
Fit the plate
(3)
and line it up.
•
Insert M 5 x 18 screws and tighten
down securely.
24
Fitting skirt and blade
•
Slide the
lower
guide slot of the
skirt
(4)
over the deflector
(1)
-
it must snap into position.
•
Push blade
(5)
into the
upper
gUide
on the skirt and line it up with the
first hole.
•
Fit the screw and tighten
it
down
firmly.
Fitting stop -
for circular saw blades
•
Remove standard deflector.
Place the stop
(1)
on the gear
head flange - fit the three
M 5 x 18 screws
(2)
provided
and tighten down securely.