Stihl HT 75 Instruction Manual - Page 26
firmly, When engine begins to fire, As soon as engine runs, Your pruner is ready for operation.
View all Stihl HT 75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
english When engine begins to fire: : Move choke lever to e : continue cranking. As soon as engine runs: : Blip the throttle trigger - the slide control moves to the run position #, and the engine returns to idling speed. Make sure carburetor is correctly adjusted - chain must not run when engine is idling. Your pruner is ready for operation. 390BA009 KN Alternative method: : Remove the chain guard. Position the shaft on a branch so that it is held by the hook. : Hold the unit firmly with your left hand around the fan housing - your thumb under the fan housing. : Pull the starter grip slowly with your right hand until you feel it engage - and then give it a brisk strong pull. Do not pull out starter rope to full length - it might break. : Do not let the starter grip snap back - guide it slowly into the housing so that the starter rope can rewind properly. To shut down engine: : Move the slide control in direction of c to $. HT 70, HT 75 25