Stihl HT 75 Instruction Manual - Page 41
After sharpening, Before long out-of-service period, Information for re-ordering chain
View all Stihl HT 75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
english : File the top of the depth gauge parallel to the stamped service marking (see arrow) - but do not lower the highest point of the depth gauge in this process. The kickback tendency of the chainsaw is increased if the depth gauges are too low. : Place filing gauge on the chain - highest point of depth gauge must be level with the filing gauge. 689BA052 KN 689BA044 KN After sharpening After sharpening, clean the chain thoroughly, remove filings or grinding dust - lubricate the chain thoroughly. Before long out-of-service period Clean the chain with a brush and store it in a well-oiled condition. Information for re-ordering chain Type: Pitch: Number of tie straps: Cutting length: Picco Micro Mini 3/8" P (9.32 mm) 44 12" (30 cm) Sharpening Toools (special accessories) Description Round file 5/32" (4.0 mm) diameter File holder Filing gauge Flat file Sharpening kit (includes all parts listed above) Part No. 5605 772 4006 5605 750 4327 0000 893 4000 0814 252 3356 5605 007 1026 40 HT 70, HT 75