Stihl MS 192 C-E Product Instruction Manual - Page 26
Cutting Attachment, Mounting the Bar and, Chain
View all Stihl MS 192 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
142BA059 KN English Cutting Attachment STIHL is the only manufacturer in the industry to produce its own chain saws, guide bars, saw chains and chain sprockets. A cutting attachment consists of the saw chain, guide bar and chain sprocket. The cutting attachment that comes standard is designed to exactly match the chain saw. 1 2 a 3 t = a : 2 - The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match. - The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3). If non-matching components are used, the cutting attachment may be damaged beyond repair after a short period of operation. 001BA191 KN Mounting the Bar and Chain Releasing the chain brake 4 N Pull the hand guard (4) toward the handle until there is an audible click - the chain is disengaged. Removing the chain sprocket cover 6 5 N Unscrew the nut (5) and remove the cover (6). 142BA058 KN 151BA002 KN Mounting the guide bar 7 8 N Turn the screw (7) counterclockwise until the tensioner slide (8) butts against the left end of the housing slot. 9 10 N Fit the guide bar over the stud (9) and engage the peg of the tensioner slide in the hole (10). Fitting the chain Wear work gloves to protect your hands from the sharp cutters. 142BA060 KN 24 MS 192 C