Stihl MS 192 C-E Product Instruction Manual - Page 37
Taking Care of the Guide
View all Stihl MS 192 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Short-term storage Wait for engine to cool down. Keep the machine with a full tank of fuel in a dry place, well away from sources of ignition, until you need it again. Long-term storage See "Storing the machine" Taking Care of the Guide Bar 2 1 3 English Chain type Picco Rapid Rapid Rapid Pitch Minimum groove depth 3/8" P 0.20" (5.0 mm) 1/4" 0.16" (4.0 mm) 3/8"; 0.325" 0.24" (6.0 mm) 0.404" 0.28" (7.0 mm) If groove depth is less than specified: N Replace the guide bar. The drive link tangs will otherwise scrape along the bottom of the groove - the cutters and tie straps will not ride on the bar rails. 143BA026 KN N Turn the bar over - every time you sharpen the chain and every time you replace the chain - this helps avoid one-sided wear, especially at the nose and underside of the bar. N Regularly clean the oil inlet hole (1), the oilway (2) and the bar groove (3). N Measure the groove depth - with the scale on the filing gauge (special accessory) - in the area used most for cutting. MS 192 C 35