Stihl MS 192 C-E Product Instruction Manual - Page 52
Specifications
View all Stihl MS 192 C-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
English Specifications EPA / CEPA The Emission Compliance Period referred to on the Emissions Compliance Label indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category A = 300 hours B = 125 hours C = 50 hours CARB The Emission Compliance Period used on the CARB-Air Index Label indicates the terms: Extended = 300 hours Intermediate = 125 hours Moderate = 50 hours Engine Displacement: 1.84 cu. in. (30.1 cm3) Bore: 1.46 in. (37 mm) Stroke: 1.10 in. (28 mm) Engine power to ISO 7293: 1.7 hp (1.3 kW) Idle speed: 3,000 rpm High speed setting when performing repairs (with bar and chain): 13,500 rpm Ignition System Electronic Spark plug (resistor type): NGK CMR 6 H Electrode gap: 0.020 in. (0.5 mm) Fuel System All position diaphragm carburetor with integral fuel pump Fuel tank capacity: 9.1 fl.oz (0.27 L) Chain Lubrication STIHL single cylinder two-stroke engine Fully automatic, speed-controlled oil pump with rotary piston Oil tank capacity: 7.4 fl.oz (0.22 L) Weight dry, without bar and chain: 7.3 lbs. (3.3 kg) Cutting Attachment Recommended cutting attachments complying with Section 5.11 of ANSI B 175.1-2000. Observe notes on ANSI B 175.1-2000 and definition of "low kickback chain" in chapter on "Safety Precautions and Working Techniques". Rollomatic E guide bars Reduced kickback STIHL guide bar (with green label) Cutting lengths: 12, 14, 16 in. (30, 35, 40 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.043 in. (1.1 mm) Nose sprocket: 9-teeth Rollomatic E Light guide bars Reduced kickback STIHL guide bar (with green label) Cutting length: 14, 16 in. (35, 40 cm) Pitch: 3/8" P (9.32 mm) Groove width: 0.050 in. (1.3 mm) Nose sprocket: 9-teeth 3/8" P Chain Low kickback STIHL saw chain (with green label) Picco Micro Mini Comfort 3 (61 PMMC3) Pitch: 3/8" P (9.32 mm) Drive link gauge: 0.043 in. (1.1 mm) 50 MS 192 C