Stihl TS 500i STIHL Cutquik Instruction Manual - Page 3

Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Contents Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Sample applications 15 Cutting wheels 18 Composite resin cutting wheels 18 Diamond cutting wheels 19 Electronic water control 22 Assembling the cast arm and guard 23 Tensioning the ribbed V-belt 27 Fitting / replacing an abrasive wheel 27 Fuel 29 Fueling 29 Starting / Stopping the Engine 30 Air Filter System 32 Engine Management 33 STIHL Injection 33 Spark Arresting Screen in Muffler 33 Spark Plug 34 Replacing the Starter Rope and Rewind Spring 35 Replacing the V-belt 37 Cut-off machine cart 38 Storing the Machine 38 Maintenance and Care 39 Main Parts 41 Specifications 43 Special Accessories 44 Maintenance and Repairs 44 STIHL Incorporated Federal Emission Control Warranty Statement Trademarks English Allow only persons who fully understand this manual to operate your cut-off 45 machine. 47 To receive maximum performance and satisfaction from your STIHL Cutquik cut-off machine, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in the chapter "Safety Precautions and Working Techniques" before using your cut-off machine. For further information you can go to www.stihlusa.com Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because a cut-off machine is a highspeed cutting tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. © ANDREAS STIHL AG & Co. KG, 2012 0458-753-8621-B. VA1.L12. 0000006169_005_GB { TS 480i, TS 500i This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1