Stihl TS 500i STIHL Cutquik Instruction Manual - Page 32

English Open the fuel filler cap 1. 2. Starting / Stopping the Engine 3 3 1307BA013 KN Press the cap down with your hand as far as possible, turn it counterclockwise (approx. 1/8 turn) and remove it. Close the fuel filler cap 1. 2. N Fit the cap and turn it until it engages in the bayonet mount. N Press the cap down with your hand and turn it clockwise (approx. 1/8 turn) until it engages completely. Check cap for tightness. Change the fuel pickup body every year 1307BA014 KN N Drain the fuel tank. N Pull the fuel pickup body out of the tank with a hook and disconnect it from the hose. N Connect a new fuel pickup body to the hose. N Return the fuel pickup body to the tank. The fuel pickup body is equipped with a magnetic separator. 1307BA015 KN 1 2 N Press throttle trigger lockout (1) and then throttle trigger (2) N Hold both lockout and trigger down simultaneously N Move the stop switch (3) to F N Release the throttle trigger, stop switch and throttle trigger lockout in succession - starting throttle position 1307BA016 KN 30 TS 480i, TS 500i