TASCAM CD-200BT Owners Manual - Page 11
Rear panel
View all TASCAM CD-200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2 - Names and functions of parts e PLAY MODE/PLAY AREA [SOURCE SEL] button Press briefly to change the playback mode. The four playback modes are continuous, single, random and program. (See "Playback modes" on page 18.) Press and hold this button to select ALL PLAY or FOLDER as the play area during data CD playback. (See "Setting the playback area" on page 18.) Press this button while pressing and holding the DISPLAY [SHIFT] button to cycle through the current source options in the following order. Current source order NOTE AUX IN cannot be selected if nothing is connected to the AUX IN jack. CAUTION The playback mode and playback area settings can be changed when the current source is Bluetooth, but these settings have no effect on Bluetooth playback. r REPEAT/INTRO CHECK [PITCH] button Press to turn the repeat playback function ON/OFF. (See "Repeat playback" on page 22.) Rear panel Press and hold this button during playback or when stopped to use the intro check playback function. The first 10 seconds of each track on the CD will be played back one after the other. During intro check playback, press and hold this button again to return to the previously active playback mode and continue playing back the current track. (See "Intro Check function" on page 24.) While pressing and holding the DISPLAY [SHIFT] button, press this button to turn the CD playback pitch control function ON/OFF. (See "Pitch control" on page 24.) CAUTION The repeat setting can be changed when the current source is Bluetooth, but this setting has no effect on Bluetooth playback. Moreover, when using Bluetooth the intro check function cannot be used. t FOLDER g/t [PITCH −/+] buttons Use these buttons when the current source is a CD and the playback area is FOLDER to change the playback folder. (See "Setting the playback folder" on page 20.) Use these buttons when the current source is a CD and the playback area is ALL PLAY to skip between folders. Press this button while pressing and holding the DISPLAY [SHIFT] button to set the pitch control value. (See "Pitch control" on page 24.) y ANALOG OUTPUT (UNBALANCED) jacks These jacks output analog signals (Standard output: -10 dBV) of the CD or Bluetooth playback signal or the signal input through the AUX IN jack. u DIGITAL OUTPUTS (COAXIAL) jack This jack outputs the CD playback signal in S/PDIF digital format. i DIGITAL OUTPUTS (OPTICAL) jack This jack outputs the CD playback signal in S/PDIF digital format. NOTE • Audio from Bluetooth playback and audio input through the AUX IN jack can only be output as analog signals. These audio sources cannot be output as digital signals. • The sampling frequency of this unit's digital output is always 44.1 kHz regardless of the playback file sampling frequency. • Digital output is possible when the pitch control function is on with CD, but the sampling frequency is changed by an amount proportional to the pitch control value. TASCAM CD-200BT 11