TASCAM CD-200BT Owners Manual - Page 22

4 - CD playback Adding more program tracks You can add tracks to the end of an already set program. 1. Press the PROGRAM EDIT button on the remote control while playback is stopped to activate program setting mode. 2. Press and hold the PROGRAM EDIT button until the empty program step where it is possible to add a track appears. (No track number is shown and PROG blinks.) 3. Use the remote number (0-9) buttons or skip (m/. and //,) buttons to select the track to add and press the PROGRAM EDIT button. 4. In this state, you can repeat step 3 to add more tracks, or you can press the PROGRAM EDIT button to exit program setting mode. CAUTION • Although tracks can be added to the end of a program and tracks can be replaced with different tracks, tracks cannot be inserted into the middle of a program. • If you want to insert a track into the middle of the program, replace and add program tracks to alter the program contents. Clearing the program You can clear the entire program that has been set. 1. Press the PROGRAM EDIT button on the remote control while playback is stopped to activate program setting mode. 2. Press and hold the PROGRAM EDIT button until the empty program step where it is possible to add a track appears. (No track number is shown and PROG blinks.) 3. Press the remote STOP button. -CLEAR- appears on the display. After clearing completes, program setting mode resumes with the empty program. Repeat playback You can play back all the tracks in the playback area repeatedly. Press the main unit REPEAT/INTRO CHECK [PITCH] button or the remote REPEAT button to turn the repeat playback function ON/OFF. Repeat ON (REPEAT indicator appears) All tracks are played back repeatedly. Repeat OFF (no indicator) Repeat playback is OFF. In addition to the above procedure, opening the disc tray or removing the disc also clears the program. NOTE • CD programs are cleared when the disc tray is opened or the current folder is changed. NOTE • With data CDs, during folder playback all tracks within the current folder will be played back repeatedly. During program playback, all tracks within the program will be played back repeatedly. • If the repeat playback function is turned ON during playback, playback continues as is until the end and then playback continues from the beginning. • If repeat playback is turned ON when stopped, repeat playback begins when the PLAY/PAUSE button is pushed. • The repeat playback function's ON/OFF state is retained even when the power is turned OFF. 22 TASCAM CD-200BT