TASCAM CD-200BT Owners Manual - Page 21

Data CD example NOTE If the program is already set, the track number of the track set as program step 01 is shown. 2. Use the remote number (0-9) buttons or search (m/. and //,) buttons to select a track to set as program step 01 (PROG and the track number blink). Use the number (0-9) buttons to input the number starting with the largest digit. 4 - CD playback • If you press the STOP button when the empty program step where it is possible to add a track appears, all steps in the program are cleared. • If you try to add more than 99 tracks, a PGM FULL error message appears. Only 99 tracks can be added. Checking the program You can check the contents of the program. 1. Press the PROGRAM EDIT button on the remote control while playback is stopped to put the unit into program setting mode. The track number and playback time of the track set as program step 01 is shown on the screen and PROG blinks. (Playback time is not displayed when using a data CD.) Track number Playback time Audio CD example Track number Playback time 2. Press the PROGRAM EDIT button to show the track information of the next program step. 3. If you press the PROGRAM EDIT button when the final program step is shown, it becomes possible to add another program step. (No track number is shown and PROG blinks.) Data CD example NOTE • When using a data CD, the screen switches to file name display if more than a second passes after pressing one of the remote number (0-9) or search (m/. and //,) buttons, but you can still add the track to the program. • If you press the STOP button while a track is selected, selection of that track is canceled, and the screen returns to the state where you can select a track. 3. Press the remote PROGRAM EDIT button to add the selected track as program step 1. 4. The unit is now ready for you to add another track as the next program step. 5. If you are finished adding tracks to the program, press the remote PROGRAM EDIT button when the empty program step is shown. The unit exits program setting mode. NOTE • The same track can be added to the program multiple times. 4. Press the PROGRAM EDIT button again to exit the program setting mode. Replacing a program track You can replace a track that has already been added to the program. 1. Press the PROGRAM EDIT button on the remote control while playback is stopped to put the unit into program mode. 2. Follow the steps in "Checking the program" above and press the PROGRAM EDIT button to show the program step with the track that you want to replace. 3. Use the remote number (0-9) buttons or skip (m/. and //,) buttons to select the desired track and press the PROGRAM EDIT button. After replacing a track, the display shows the empty step at the end of the program and you can add another track to the end of the program if desired. 4. Press the PROGRAM EDIT button again to exit program setting mode. TASCAM CD-200BT 21