TASCAM CD-200BT Owners Manual - Page 14

3 - Preparations Making connections Examples of connections that can be made with a CD-200BT are shown below. 88 Precautions before making connections • Before connecting other devices, read their operation manuals carefully and connect them properly. • Turn the power OFF or set the power to standby for this unit and all units to be connected to it. • Set up all the units so that they are powered from the same line. When using a power strip, for example, use a thick cable with a high current capacity to reduce fluctuation of the power voltage. ANALOG IN (UNBALANCED) Mixer, Recorder, Amplifier, or other device DIGITAL IN (COAXIAL) DIGITAL IN (OPTICAL) Digital mixer, Digital recorder, Digital amplifier, or other device 88 Connecting analog audio devices Connect the analog output jacks of this unit to the input jacks of a stereo amplifier, mixer, recorder or other device with analog inputs. NOTE • Cables are not included with this unit. • Do not bundle RCA cables with power cords or speaker cables. Doing so could cause reduced audio quality or noise. 88 Connecting digital audio devices Connect a digital output jack (coaxial or optical) of this unit to the input jack of a stereo amplifier, mixer, recorder or other device with a digital input. NOTE • Bluetooth audio playback signals and AUX IN input signals can only be output from the analog jacks. They cannot be output from the digital connectors. • The sampling frequency of this unit's digital output is always 44.1 kHz regardless of the playback media/file sampling frequency. • During playback of CD, digital output is possible when the pitch control function is in use, but the sampling frequency is changed by an amount equivalent to the pitch control value. When the pitch control function is on, some devices might not be able to accept signals from the digital outputs of this unit. 14 TASCAM CD-200BT