TASCAM CD-200BT Owners Manual - Page 20

4 - CD playback Search forward and backward You can search forward and backward in a track while listening to it. 1. Play or pause the desired track. 2. Press and hold a SEARCH m/, [.//] button on the main unit or a search (m/. or //,) button on the remote control to start searching forward or backward. 3. Release the button that you are holding to stop searching and return the unit to the state it was in before searching (playback or pause). NOTE Searching forward and backward is possible with sources other than audio CDs. Folder playback (data CDs) With data CDs, you can set the selected folder (current folder) as the playback area. Follow the procedures below to set the playback folder. You can also set the playback area to be all the tracks/files on the CD by selecting ALL PLAY. Setting the playback folder 1. Press and hold the PLAY MODE/PLAY AREA [SOURCE SEL] button on the main unit or press the remote PLAY AREA button to set the playback area to FOLDER. 2. Use the main unit FOLDER g/t [PITCH −/+] buttons or the remote FOLDER g/t buttons to skip to the previous or next folder. This will skip to the beginning of the first track in the previous or next folder. If you hold down one of these buttons, you can skip through folders continuously in order. NOTE • When you skip to a different folder, it becomes the current folder. • During folder playback, repeat playback will play back all tracks inside the current folder repeatedly. • During folder playback, random playback will play back all tracks inside the current folder randomly. Programmed playback To use programmed playback, you must set a program either before or after setting the playback mode to programmed playback mode. (See "Selecting the playback mode" on page 18.) When in programmed playback mode, press the PLAY/PAUSE button on the main unit or the remote control to start playback of the set program in order from the first track (program step 01). Press the main unit SEARCH m/, [.//] button or the remote search (m/. or //,) button to skip to the previous or next program step. When playback is stopped in program playback mode using an audio CD, the total number of tracks in the program and the total program time are shown. When using a data CD, only the program number is shown. NOTE • To select programmed playback, when stopped, press the main unit PLAY MODE/PLAY AREA [SOURCE SEL] button or the remote PLAY MODE button. • With data CDs, you cannot set a program when the playback area is ALL PLAY. Change the playback area to FOLDER to enable tracks in the current folder to be used in the program. Setting the program When no program is set, follow the procedures below to set a program using the remote control. NOTE • The program cannot be set from the main unit. • You can set a program at any time regardless of the current playback mode. • CD programs are cleared when the disc tray is opened or the current folder is changed. 1. Press the remote PROGRAM EDIT button when playback is stopped. 20 TASCAM CD-200BT The unit enters program setting mode. If no program has been set, it will be possible to choose a track for program step 01 (PROG indicator blinks). Audio CD example