TASCAM CD-200BT Owners Manual - Page 8
Trademarks, Precautions for placement, Power supply, Beware of condensation, Cleaning the unit
![]() |
View all TASCAM CD-200BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 - Introduction Trademarks • TASCAM is a registered trademark of TEAC Corporation. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TEAC CORPORATION is under license. • © 2012 CSR plc and its group companies. The aptX® mark and the aptX logo are trade marks of CSR plc or one of its group companies and may be registered in one or more jurisdictions. • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. • Other company names, product names and logos in this document are the trademarks or registered trademarks of their respective owners. Any data, including, but not limited to information, described herein are intended only as illustrations of such data and/or information and not as the specifications for such data and/or information. TEAC Corporation disclaims any warranty that any use of such data and/or information shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such data and/or information. This product is designed to help you record and reproduce sound works to which you own the copyright, or where you have obtained permission from the copyright holder or the rightful licensor. Unless you own the copyright, or have obtained the appropriate permission from the copyright holder or the rightful licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties under copyright laws and international copyright treaties. If you are uncertain about your rights, contact your legal advisor. Under no circumstances will TEAC Corporation be responsible for the consequences of any illegal copying performed using the recorder. Precautions for placement • The operating temperature should be between 5°C and 35°C (41°F and 95°F). • Make sure that the unit is mounted in a level position for correct operation. • Do not place any object on the unit for heat dissipation. • Avoid installing this unit on top of any heat-generating electrical device such as a power amplifier. Power supply Connect the unit to the standard power outlet. Hold the plug when connecting and disconnecting the power cord. Beware of condensation If the unit is moved from a cold to a warm place, or used immediately after a cold room has been heated or otherwise exposed to a sudden temperature change, condensation could occur. Should this happen, leave the unit for one or two hours before turning the unit on. Cleaning the unit To clean the unit, wipe it gently with a soft dry cloth. Do not wipe with chemical cleaning cloths, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface. Once every five years, please contact the retailer where you purchased the unit or a TASCAM service center for internal cleaning. If the unit is not cleaned for a long time and dust is allowed to accumulate inside it, fire or malfunction could result. Cleaning is more effective when conducted before the humid season. Please check with us about the cost of internal cleaning. 8 TASCAM CD-200BT
![](/manual_guide/products/tascam-cd200bt-owners-manual-a0753b6/8.png)