TASCAM CD-200BT Owners Manual - Page 15

Connecting a device to the AUX IN jack 3 - Preparations Preparing the remote control Inserting batteries 1. Open the lid. By connecting the audio output of a portable music player or similar device to the external input (AUX IN) jack, the audio from that device can be output from this unit's output jacks. The level input through the AUX IN jack cannot be adjusted by this unit. Adjust the output level of the external device. CAUTION • Before connecting an external device to the AUX IN jack, minimize the volume of that device. Failure to do so could result in sudden loud noises that could, for example, harm your hearing. • Before connecting to or disconnecting from the AUX IN jack, change the current source to something other than AUX IN (CD or Bluetooth), or turn this unit off. Cautions about using the remote control • When using other devices controlled by infrared rays, use of this remote control might operate these devices by mistake. • Use the remote control within the following range. Remote Sensor 2. Confirm +/- polarity, and insert two AA batteries. 3. Close the lid. Replacing the batteries Replace both batteries with new ones when the range of the remote control becomes short or if the function buttons become unresponsive. Cautions about the use of batteries Misuse of batteries could cause them to leak, rupture or otherwise be damaged. Please read and abide by the precautions on them when using batteries. Also see "CAUTIONS ABOUT BATTERIES" on page 4. Operation distance Directly in front: Within 7 meters 15° left or right: Within 7 meters TASCAM CD-200BT 15