TASCAM CD-200BT Owners Manual - Page 13

2 - Names and functions of parts 4 PLAY MODE button Press to change the playback mode. The four playback modes are continuous, single, random and program. (See "Playback modes" on page 18.) CAUTION The playback mode, playback area, and repeat settings can be changed when the current source is Bluetooth, but these settings have no effect on Bluetooth playback. Moreover, when using Bluetooth the intro check function cannot be used. 5 REPEAT button Press to turn the repeat playback function ON/OFF. (See "Repeat playback" on page 22.) 6 SOURCE SEL button Change the current source in the following order. (See "Selecting the audio to output (current source)" on page 16.) t −/+ buttons Use these adjust the pitch control value during CD playback. (See "Pitch control" on page 24.) y STOP button Press this button to stop playback. Press this button when editing a program to clear all items added to the program. (See "Setting the program" on page 20.) u PLAY/PAUSE button Press during playback to pause. When playback is stopped or paused, press to start playback. Current source order NOTE AUX IN cannot be selected if nothing is connected to the AUX IN jack. 7 PITCH button Press this button to turn the CD playback pitch control function ON/OFF. (See "Pitch control" on page 24.) 8 FOLDER g/t buttons Use these buttons when the playback area is set to FOLDER to change the playback folder. (See "Setting the playback folder" on page 20.) Use these buttons when the playback area is set to ALL PLAY to skip between folders. 9 m/. and //, buttons Press briefly to select tracks (skip). Press and hold to search a track. 0 OPEN/CLOSE button Use to open and close the disc tray. q DISPLAY button Press to change how the time is shown and other information. When this button is pressed, the type of information currently displayed is shown for two seconds. Press the button again during this time to change the type of information shown. The information that can be shown depends on the current source, type of disc and status of operation. (See "Time and text information display" on page 23.) (See "Bluetooth information display" on page 26.) w PAIRING button Press and hold this button to start Bluetooth pairing mode. Press and hold this button when in pairing mode to end pairing mode. (See "Pairing" on page 25.) e PROGRAM EDIT button Use to set, confirm and edit programs. (See "Programmed playback" on page 20.) r DEVICE SEL button The name of the device connected (or ready to be connected) by Bluetooth is shown for two seconds. Press this button again during this time to change the device to be connected by Bluetooth. (See "Searching for Bluetooth devices" on page 25.) TASCAM CD-200BT 13