TASCAM DP-006 Owners Manual - Page 19
Using internal mics to record rhythm guitar to TRACK 3
View all TASCAM DP-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2 - Quick Start Guides NOTE • If an OL indicator continues to light even when the LEVEL knob is turned down, the mic signal itself is too loud. In this case, if the input source setting is INT.MIC X-High, change it to INT.MIC X-Midor INT. MIC X-Low(Xis Aor B). If the OL indicator continues to light even when set to INT.MIC X-Low, move the sound source away from the mic or lower the volume at the sound source. • When an internal mic is an input source if the REC indicator is unlit for the track with that mic as its recording source, you will not be able to hear that input signal. CAUTION Always monitor through headphones when using a mic. If you monitor through speakers, feedback could occur. Using internal mics to record rhythm guitar to TRACK 3 1. Press the Play (7) button while pressing and holding the Record (0) button to start recording and play the rhythm guitar part. The Record (0) indicator lights, and the TRACK 3 REC indicator stops blinking and stays lit. TRACK 3 REC indicator 2. When you are done playing, press the Stop (8) button to stop recording. 3. Press the TRACK 3 REC button to end recording standby. The REC indicator becomes unlit. 19 TASCAM DP-006