Home » TASCAM Manuals » Audio Mixers » TASCAM DP-006 » Manual Viewer

TASCAM DP-006 Owners Manual - Page 66

Using repeat playback, Setting the time between repetitions (repeat interval), Repeat icon

Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

7 - Recorder Functions 3. When finished editing, press the HOME button to return to the Home Screen. Using repeat playback 1. Set the starting (IN) and ending (OUT) points for the time that you want to repeat, and then return to the Home Screen. 2. Press the REPEAT button to start repeat playback. Setting the time between repetitions (repeat interval) The time between repetitions (repeat interval) can be set from 0.5 to 9.9 seconds. 1. Press the MENU button to open the MENUscreen. 2. Use the DATA wheel to select (highlight) the PREFERENCEmenu item, and press the F4 [t] button to open the PREFERENCEscreen. The icon appears on the Home Screen during repeat playback. Repeat icon Playback starts from the IN point. When the OUT point is reached, after the set repeat interval elapses, playback starts again from the IN point. Playback continues to repeat between the IN and OUT points. 3. Press the REPEAT button again to stop repeat playback. The icon on the Home Screen disappears. The next section explains how to set the repeat interval that determines the amount of time until playback starts again after the OUT point is reached. NOTE If the time between the IN and OUT points is less than 2 frames, an I/ O Too Shortpop-up message appears when you press the REPEAT button and repeat playback will not occur. 3. Use the F3 [5] and F4 [b] buttons to select (highlight) the Repeat Intitem setting value, and use the DATA wheel to set the value between 0.5sec(default value) and 9.9sec(in 0.1-second increments). Use the F3 [5] and F4 [b] buttons to select (highlight) the Repeat Intitem setting value, and use the DATA wheel to set the value between 0.5secand 9.9sec(in 0.1-second increments). 4. After making the setting, press the HOME button to return to the Home Screen. 66 TASCAM DP-006

Section	Page
1 – Introduction	9
Features	9
Included items	9
Conventions used in this manual	10
Trademarks	10
About SD cards	11
Precautions for use	11
Precautions for installation	11
Beware of condensation	11
Cleaning the unit	11
2–Quick Start Guides	12
Playback and mixing	12
Preparing	12
Playing and mixing the demo song	13
Recording and mastering	15
Creating a new song	15
Setting the internal mics as input sources	16
Setting the internal mics as the recording sources for TRACK 3	17
Adjusting the input level and monitoring	18
Using internal mics to record rhythm guitar to TRACK 3	19
Listening to the recording	20
Connecting an electric guitar	20
Setting the guitar as an input source	21
Recording lead guitar to TRACK 2	21
Recording vocals on TRACK 1	23
Creating a stereo master track	25
Checking the stereo master track	27
Transferring the stereo master track to a computer	28
Shutting down	28
3 – Names and functions of parts	29
Top Panel	29
Front panel	31
Rear panel	32
Left side panel	32
Right side panel	33
Bottom panel	33
Home Screen	34
Menu structure	36
Screen operations	37
4 – Preparations	39
Preparing the power and SD card	39
Inserting an SD card	39
Removing an SD card	39
SD card write-protection switches	39
Preparing the power	40
Start-up & shutdown	41
Starting up the unit	41
Shutting down	41
Preparing SD cards for use	42
Recorder modes	42
Connecting with other equipment	43
Rear panel connections	43
Left side panel connections	43
Right side panel connections	44
Adjusting the contrast	44
5 – Song Management	45
Partitions and songs	45
Selecting the active partition	45
Editing names	46
Loading a saved song	46
Creating a new song	47
Saving a song	47
Viewing song information	48
Copying songs	48
Erasing songs	49
Protecting songs	50
6 – Basic Recording	51
Selecting the input source	51
Monitoring the input signal	52
Setting the monitoring mode	52
OL indicators and level meters	53
Assigning inputs	54
Setting the track type (Tracks 3 and 4 only)	54
Assigning inputs to stereo tracks (Tracks 3 and 4 only)	55
Assigning inputs to mono tracks	56
Making the first recording	56
Multitrack recording	57
Setting the recording tracks	57
Setting TRACK PAN/BAL and LEVEL values	57
Input selection and assignment	57
Setting input levels	58
Recording additional tracks	58
Undoing operations (undo)	58
Undoing the last operation (single undo)	58
Undoing a previous operation (multi-undo)	59
Erasing the operation history	60
7 – Recorder Functions	61
Punching in and out	61
Bouncing tracks	61
Using the bounce function	62
Confirming the result	63
Locate and search functions	64
Direct locate function	64
Returning to the song beginning (RTZ function) or the point where recording was last started (LRP function)	64
Search backward/forward	64
Repeat playback	65
Setting IN and OUT points	65
Using repeat playback	66
Setting the time between repetitions (repeat interval)	66
8 – Editing Tracks	67
Overview of track editing	67
Editing points	67
Basic editing procedures	67
Track editing function setting items	68
CLONE TRACK (track duplication)	69
CLEAN OUT (track erase)	70
SILENCE (part erase)	70
CUT (remove part)	71
OPEN (insert silence)	71
9 – Mixdown and mastering	72
Mixdown	72
Level and balance	72
Stereo position (panning)	72
Creating stereo master tracks	72
Setting the starting and ending points	72
Creating a stereo master track	72
Checking stereo master tracks	74
10 – Miscellaneous Functions	75
Metronome	75
Tuner	76
Automatic power saving function	77
Restoring preferences to default values	77
Viewing information	78
11 – SD Card Management	79
Overview of partitions	79
Formatting SD cards	79
Reformatting MTR partitions	81
Reformatting FAT partitions	82
Initializing SD cards	82
12 – Exchanging Data with a Computer	83
Supported operating systems	83
Connecting with a computer	84
Disconnecting	85
Song backup and restoration	86
Backing-up songs	86
Restoring songs	87
Track import and export	88
Importing to tracks	88
Exporting tracks	90
Exporting stereo master tracks	92
13 – Troubleshooting	93
14 – Message Lists	94
15 – Specifications	98
Media and file systems	98
Inputs and outputs	98
Analog audio input and output	98
Data input and output	98
Audio performance	98
Operating requirements	99
General	99
Backup memory	100
Dimensions	100
Block diagram	101

Match case Limit results 1 per page

TASCAM

DP-006

7 – Recorder Functions

When finished editing, press the

HOME

button to return to the Home

Screen.

Using repeat playback

Set the starting (IN) and ending (OUT) points for the time that you want

to repeat, and then return to the Home Screen.

Press the

REPEAT

button to start repeat playback.

The

icon appears on the Home Screen during repeat playback.

Repeat icon

Playback starts from the IN point. When the OUT point is reached, after

the set repeat interval elapses, playback starts again from the IN point.

Playback continues to repeat between the IN and OUT points.

Press the

REPEAT

button again to stop repeat playback. The

icon on

the Home Screen disappears.

The next section explains how to set the repeat interval that determines

the amount of time until playback starts again after the OUT point is

reached.

NOTE

If the time between the IN and OUT points is less than 2 frames, an

O Too Short

pop-up message appears when you press the

REPEAT

button and repeat playback will not occur.

Setting the time between repetitions (repeat

interval)

The time between repetitions (repeat interval) can be set from 0.5 to 9.9

seconds.

Press the

button to open the

screen.

Use the

DATA

wheel to select (highlight) the

PREFERENCE

menu item,

and press the

[

] button to open the

PREFERENCE

screen.

Use the

[

] and

[

] buttons to select (highlight) the

Repeat

Int

item setting value, and use the

DATA

wheel to set the value

between

0.5sec

(default value) and

9.9sec

(in 0.1-second incre-

ments).

Use the

[

] and

[

] buttons to select (highlight) the

Repeat

Int

item setting value, and use the

DATA

wheel to set the value

between

0.5sec

and

9.9sec

(in 0.1-second increments).

After making the setting, press the

HOME

button to return to the Home

Screen.