TASCAM DP-006 Owners Manual - Page 60
Erasing the operation history, UN/REDO, F4 [NO]
![]() |
View all TASCAM DP-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6 - Basic Recording Erasing the operation history When the power is turned OFF(in standby), the operation history of the currently loaded song is erased (cleared). The operation history is not restored, so past operations cannot be undone or redone when the power is turned ON again. You can also erase the operation history of the currently loaded song without turning the power OFF by using the following procedures. NOTE Turning the power OFF (putting it in standby) does not erase the operation history of songs that are not loaded. 1. While pressing and holding the Stop (8) button, press the UN/REDO button to open the HISTORYscreen. 4. Press the F3 [YES] button to erase the operation history and delete unused data. The Home Screen reopens when this operation completes. NOTE To cancel erasing the operation history, press the F4 [NO] button. TIP • If you open the HISTORYscreen immediately after erasing the operation history, the event (operation) that appears is 0(-START UP-), showing that the operation history has been cleared. • If you want to keep the operation history even when you power OFF(in standby), turn song protect ON before turning the power OFF(in standby). (See "Protecting songs" on page 50.) CAUTION You cannot undo erasing the operation history! Only do it if you are certain about it. 2. Press the F4 [CLEAR] button. A confirmation pop-up message appears. 3. Press the F3 [YES] button. Another confirmation pop-up message appears. 60 TASCAM DP-006
![](/manual_guide/products/tascam-dp006-owners-manual-c3b57ec/60.png)