TASCAM DP-006 Owners Manual - Page 76
Tuner, INPUT
![]() |
View all TASCAM DP-006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
10 - Miscellaneous Functions Tuner Use the built-in chromatic tuner to tune guitars or wind instruments, for example. 1. Connect a guitar or bass to INPUT A. INPUT B cannot be used for tuning. Use built-in MIC A to tune other instruments such as wind instruments. 2. On the INPUT SETTINGscreen, set the IN Ainput source to GUITAR/ LINE, GUITAR/LINE Mor GUITAR/LINE H. (See "Selecting the input source" on page 51.) NOTE When using the built-in mic, select INT.MIC A-Low, INT.MIC A-Midor INT.MIC A-Highon the INPUT SETTINGscreen. 3. Press the HOME button to show the Home Screen. 4. When the recorder is stopped, press the F1 [TUNER] button to open the TUNER screen. The Calibration(standard frequency) item is selected (highlighted). 5. Use the DATA wheel to set the standard frequency of the A note between 435 and 445 Hz. (default value: "440Hz") 6. Play the instrument and tune it. The pitch name closest to the string appears above the meters. Tune the string roughly until the sound name that you want appears. Then, fine tune the string until the rectangle at the middle of the meter darkens, showing that the string is in tune. If the pitch is too low, a bar extends to the left of the middle and if it is too high it extends to the right. The longer the bar is the more out of tune the string is. The rectangle at the middle of the meter darkens when the string is in tune. 7. When you are finished tuning, press the HOME button to open the Home Screen. NOTE If you want to monitor the input signal, press the REC button of the track that has IN A(INPUT A) assigned to it. (See "Assigning inputs" on page 54.) 76 TASCAM DP-006
![](/manual_guide/products/tascam-dp006-owners-manual-c3b57ec/76.png)