TP-Link Archer D9 Archer D9 V1 User Guide - Page 43
MAC Clone, ALG Settings
View all TP-Link Archer D9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide 4.5.5 MAC Clone Choose menu "Network""MAC Clone", you can configure the MAC address of the WAN Interface as shown below. The WAN Interface List displays the WAN Interfaces you have configured on the section 4.5.1 WAN Settings and its default MAC Address. You can select the corresponding WAN Interface from the drop-down list and click Clone MAC To button to clone your current PC MAC, and then click Sav e . Note: Figure 4-18 Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not be the same with each other. 4.5.6 ALG Settings Choose menu "Network""ALG Settings", and then you can configure the basic security in the screen as shown in Figure 4-19. Figure 4-19 Virtual Private Network (VPN): VPN Pass-through must be enabled if you want to allow VPN tunnels using VPN protocols to pass through the modem router. • PPTP Pass-through: PPTP (Point-to-Point Tunneling Protocol) allows the Point-to-Point Protocol (PPP) to be tunneled through an IP network. To allow PPTP tunnels to pass through the modem router, click Enable. 32