TP-Link Archer D9 Archer D9 V1 User Guide - Page 56

Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide You can also keep the default WPS Status as Enabled and click the Add device button in Figure 4-32, then Choose "Press the WPS button of the new device within the next two minutes" and click Connect. (Shown in the following figure) Figure 4-33 Step 2: Press and hold the WPS button of the client device directly. Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. Step 4: When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions. II. Ente r the client device's PIN on the mode m router Use this method if your client device has a Wi-Fi Protected Setup PIN number. Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-32, then the following screen will appear. Figure 4-34 Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click Connect button. Step 3: "Connect successfully" will appear on the screen of Figure 4-34, which means the client device has successfully connected to the modem router. III. Ente r the modem router's PIN on your clie nt device Use this method if your client device asks for the modem router's PIN number. Step 1: On the client device, enter the PIN number listed on the modem router's Wi-Fi Protected Setup screen. (It is also labeled on the back of the modem router.) 45