TP-Link Archer D9 Archer D9 V1 User Guide - Page 74
Guest Network
View all TP-Link Archer D9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Figure 4-50 M AC Addre ss: The connected wireless station's MAC address Current Status: The connected wireless station's running status, one of STA-AUTH/ STA-ASSOC/ STA-JOINED/ WPA/ WPA-PSK/ WPA2/ WPA2-PSK/ AP-UP/ AP-DOWN/ Disconnected Re ce ived Packets: Packets received by the station Se nt Packe ts: Packets sent by the station Click on the Refresh button to update this page. 4.10 Guest Network There are four submenus under the Guest Network menu: Basic Settings 2.4GHz, Basic Settings 5GHz, Guest Status 2.4GHz and Guest Status 5GHz. Click any of them, and you will be able to scan or configure the corresponding function. The detailed explanations for each submenu are provided below. 4.10.1 Basic Settings 2.4GHz Choose menu "Guest Network""Basic Settings 2.4GHz", and you will see the screen as shown in Figure 4-51. This feature allows you to create a separate network for your guests without allowing them to access your main network and the computers connected to it. Figure 4-51 Guest Network: Check this box to enable 2.4GHz Guest Network. And you can set wireless parameters for 2.4GHz guest network as shown in Figure 4-52. 63