TP-Link Archer D9 Archer D9 V1 User Guide - Page 57
Wireless Security - no lights
View all TP-Link Archer D9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Arche r D9 AC1900 Wire le ss Dual Band Gigabit ADSL2+ M ode m Router Use r Guide Step 2: Step 3: Step 4: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process. When the WPS LED is on, the client device has successfully connected to the modem router. Refer back to your client device or its documentation for further instructions. Note: 1 The WPS LED on the modem router will light green for five minutes if the device has been successfully added to the network. 2 The WPS function cannot be configured if the Wireless Function of the modem router is disabled. Please make sure the Wireless Function is enabled before configuring the WPS. 4.8.3 Wireless Security Choose menu "Wireless 2.4GHz"" Wireless Security", you can configure the security settings of your wireless network. There are three wireless security modes supported by the modem router: WPA/WPA2 - Personal, WPA/WPA2 - Enterprise, WEP (Wired Equivalent Privacy). Figure 4-35 Disable Wireless Security: If you do not want to use wireless security, check this radio button. But it's strongly recommended to choose one of the below modes to ensure security. WPA/WPA2-Personal: It's the WPA/WPA2 authentication type based on pre-shared passphrase. It is chosen by default. • Authentication Type: You can choose the type for the WPA/WPA2-Personal security on the drop-down list. The default setting is Auto, which can select WPA-PSK or WPA2-PSK as authentication type automatically based on the wireless station's capability and request. 46