TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 262
access-list policy name
View all TP-Link T2500G-10MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
source-mac -- The source MAC address contained in the rule. source-mac-mask -- The source MAC address mask. It is required if you typed the source MAC address. destination-mac -- The destination MAC address contained in the rule. destination-mac-mask -- The destination MAC address mask. It is required if you typed the destination MAC address. vlan-id -- The VLAN ID contained in the rule, ranging from 1 to 4094. ethernet-type -- EtherType contained in the rule, in the format of 4-hex number. user-pri -- The user priority contained in the rule, ranging from 0 to 7. By default, it is not limited. time-segment -- The time-range for the rule to take effect. By default, it is not limited. Command Mode MAC Access-list Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Create a MAC ACL whose ID is 20, and add Rule 10 for it. In the rule, the source MAC address is 00:01:3F:48:16:23, the source MAC address mask is 11:11:11:11:11:00, VLAN ID is 2, the user priority is 5, the time-range for the rule to take effect is "tRange1", and the packets match this rule will be forwarded by the switch: T2500G-10MPS(config)# mac access-list 20 T2500G-10MPS(config-mac-acl)# rule 10 permit smac 00:01:3F:48:16:23 smask 11:11:11:11:11:00 vid 2 pri 5 tseg tRange1 29.11 access-list policy name Description The access-list policy name command is used to add Policy. To delete the corresponding Policy, please use no access-list policy name command. A Policy is used to control the data packets those match the corresponding ACL rules by configuring ACLs and actions together for effect. The 244