TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 354

Parameter index -- The index number of the event entry, ranging from 1 to 12. You can only select one entry for each command. user-name -- The name of the User to which the event belongs, ranging from 1 to 16 characters. By default, it is "public". descript -- The description of the event, ranging from 1 to 16 characters. By default, it is empty. type -- The event type, with none, log, notify and both options. None indicates no processing, log indicates logging the event, notify indicates sending trap messages to the management station, and both indicates logging the event and sending trap messages to the management station. owner-name -- The owner of the event entry, ranging from 1 to 16 characters. By default, it is "monitor". Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the user name of entry 1, 2, 3 and 4 as user1, the description of the event as description1, the type of event as log and the owner of the event as owner1: T2500G-10MPS(config)# rmon event 1-4 user user1 description description1 type log owner owner1 34.16 rmon alarm Description The rmon alarm command is used to configure SNMP-RMON Alarm Management. To return to the default configuration, please use no rmon alarm command. Alarm Group is one of the commonly used RMON Groups. RMON alarm management allows monitoring the specific alarm variables. When the value of a monitored variable exceeds the threshold, an alarm event is generated, which triggers the switch to act in the set way. 336