TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 325
ipv6 mld snooping multi-vlan-config
View all TP-Link T2500G-10MPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
Parameter vlan-id-list -- The ID list of the VLAN desired to modify configuration, ranging from 1 to 4094, in the format of 1-3, 5. port-list -- Forbid the specified ports as being router ports. Packets sent from multicast routers to these ports will be discarded. port-channel-id -- Forbid the specified port-channels as being router ports. Packets sent from multicast routers to these port-channels will be discarded. Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Forbid the Ethernet ports 1/0/1-3 as being router ports in VLAN 1 : T2500G-10MPS(config)# ipv6 mld snooping vlan-config 1 router-port-forbidd interface gigabitEthernet 1/0/1-3 33.12 ipv6 mld snooping multi-vlan-config Description The ipv6 mld snooping multi-vlan-config command is used to create Multicast VLAN. To delete the corresponding Multicast VLAN, please use no ipv6 mld snooping multi-vlan-config command. To restore the default values, please use no ipv6 mld snooping multi-vlan-config with specified parameters. Syntax ipv6 mld snooping multi-vlan-config [ vlan-id ] [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel port-channel-id } ] no ipv6 mld snooping multi-vlan-config [ rtime router-time | mtime member-time | rport interface { gigabitEthernet port-list | port-channel port-channel-id } ] Parameter vlan-id -- The ID of the multicast VLAN desired to create or modify, ranging from 2 to 4094. If not specified, the default multicast VLAN will be selected. 307