TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 353

Syntax rmon history index interface gigabitEthernet port [ interval seconds ] [ owner owner-name ] [ buckets number ] no rmon history index Parameter index -- The index number of the entry, ranging from 1 to 12, in the format of 1-3,5. port --The Ethernet port number. seconds -- The interval to take samplings from the port, ranging from 10 to 3600 in seconds. By default, it is 1800. owner-name -- The owner of the history sample entry, ranging from 1 to 16 characters. By default, it is "monitor". number -- The maximum number of buckets desired for the RMON history group of statistics, ranging from 1 to 130. The default is 50 buckets. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds for the entry 1-3: T2500G-10MPS(config)# rmon history 1-3 interface gigabitEthernet 1/0/2 interval 100 owner owner1 34.15 rmon event Description The rmon event command is used to configure the entries of SNMP-RMON Event. To return to the default configuration, please use no rmon event command. Event Group, as one of the commonly used RMON Groups, is used to define RMON events. Alarms occur when an event is detected. Syntax rmon event index [ user user-name ] [ description descript ] [ type { none | log | notify | log-notify }] [ owner owner-name ] no rmon event index 335