TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 350

Parameter over-max-pwr-budget -- Enable PoE over max power budget trap. The trap can be triggered when the total power required by all the connected PDs exceeds the maximum power the PoE switch can supply. port-pwr-change -- Enable PoE port power change trap . The trap can be triggered when a PoE port starts to supply power or stops supplying power. port-pwr-deny -- Enable PoE port power deny trap . When the total power required by all the connected PDs exceeds the system power limit, the switch will power off PDs on low-priority PoE ports to ensure stable running of the other PDs. The trap can be triggered when the switch powers off PDs on low-priority PoE ports. port-pwr-over-30w -- Enable PoE port power over 30 watts trap. The trap can be triggered when the power required by the connected PD exceeds 30 watts. port-pwr-overload -- Enable PoE port power overload trap. The trap can be triggered when the power required by the connected PD exceeds the maximum power that the port can supply. port-short-circuit -- Enable PoE port short circuit trap. The trap can be triggered when a short circuit is detected on a PoE port. thermal-shutdown --Enable PoE port short circuit trap. The trap can be triggered when a short circuit is detected on a PoE port. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enable SNMP PoE over max power budget traps for the switch: T2500G-10MPS(config)# snmp-server traps power over-max-pwr-budget 34.12 snmp-server traps ddm Description The snmp-server traps ddm command is used to enable SNMP DDM traps. DDM function is used to monitor the status of the SFP modules inserted into the SFP ports on the switch. 332