TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 386

Parameter method-list -- Specify the login method list on the console port. It is "default" by default, which contains the method "local". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the login authentication method list on the console port as "list1": T2500G-10MPS(config)# line console 0 T2500G-10MPS(config-line)# login authentication list1 36.17 enable authentication(console) Description The enable authentication command is used to apply the privilege authentication method list to the console port. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the console port. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the console port as "list2": 368