TP-Link T2500G-10MPS T2500G-10MPSUN V1 CLI Reference Guide Guide - Page 356

owner-name -- The owner of the entry, ranging from 1 to 16 characters. By default, it is monitor. interval -- The alarm interval time, ranging from 10 to 3600 in seconds. By default, it is 1800. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure rmon alarm entries 1-3 binding with statistics entry 2, the owners as owner1 and the alarm intervals as 100 seconds: T2500G-10MPS(config)#rmon alarm 1-3 stats-index 2 owner owner1 interval 100 34.17 rmon statistics Description The rmon statistics command is used to configure the entries of SNMP-RMON statistics. To delete the corresponding entry, please use no rmon statistics command. The maximum supported entries are 1000. Syntax rmon statistics index interface gigabitEthernet port [ owner owner-name] [ status { underCreation | valid }] no rmon statistics index Parameter index -- The index number of the statistics entry, ranging from 1 to 65535, in the format of 1-3,5. port -- The statistics port number, in the format of 1/0/1. owner-name -- The creator of the event entry, ranging from 1 to 16 characters. By default, it is "monitor". status -- The status of the statistics entry, either "underCreation" or "valid". "underCreation" means this entry won't take effect until it is modified to "valid"; "valid" means this entry takes effect immediately after it is created. Command Mode Global Configuration Mode 338