TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 107
show bridge port-security, show bridge address
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
00:1e:4b:04:01:5d: TP-LINK(config)# bridge address filtering 00:1e:4b:04:01:5d 1 show bridge port-security Description The show bridge port-security command is used to configure the Port Security for each port, such as configure the Max number of MAC addressed that can be learned on the port and the Learn Mode. Syntax show bridge port-security [port-num] Parameter port-num -- The port number of the switch. By default, the Port Security configuration of all ports is displayed. Command Mode Any Configuration Mode Example Display the Port Security configuration of port2: TP-LINK(config)# show bridge port-security 2 show bridge address Description The show bridge address command is used to display the information of all Address entries. Syntax show bridge address { dynamic | static | filtering | all } Parameter dynamic | static | filtering | all -- the type of your desired entry Command Mode Any Configuration Mode Example Display the information of all Address entries: TP-LINK(config)# show bridge address all 94