TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 117
loopback, show system-info
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Command Mode User EXEC Mode and Privileged EXEC Mode Example Test the connectivity between the switch and the network device with the IP 192.168.0.131. If the destination device has not been found after 20 maxHops, the connection between the switch and the destination device is failed to establish: TP-LINK# tracert 192.168.0.131 20 loopback Description The loopback command is used to test whether the port is available or not. Syntax loopback {port} { internal | external } Parameter port -- The number of the port which is selected for loopback test. internal | external -- Loopback Type. There are two options, Internal and External. Command Mode User EXEC Mode and Privileged EXEC Mode Example Do a Internal-type loopback test for port 4: TP-LINK#loopback 4 internal show system-info Description The show system-info command is used to display System Description, Device Name, Device Location, System Contact, Hardware Version, Firmware Version, System Time, Run Time and so on. Syntax show system-info Command Mode 104