TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 155
acl rule std-acl
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
ethernet-type -- EtherType contained in the rule, in the format of 4-hex number. user-pri -- The user priority contained in the rule, ranging from 0 to 7. By default, it is not limited. time-segment -- The time-range for the rule to take effect. By default, it is not limited. index -- Change the index number of the entry. Command Mode Global Configuration Mode Example Edit the MAC ACL whose ID is 20, and add Rule 10 for it. In the rule, the source MAC address is 00:01:3F:48:16:23, the source MAC address mask is 11:11:11:11:11:00, VLAN ID is 2, the user priority is 5, the time-range for the rule to take effect is tSeg1, and the packets match this rule will be forwarded by the switch: TP-LINK(config)# acl edit rule mac-acl 20 10 op permit smac 00:01:3F:48:16:23 smask 11:11:11:11:11:00 vid 2 pri 5 tseg tSeg1 acl rule std-acl Description The acl rule std-acl command is used to add Standard-IP ACL rule. To delete the corresponding rule, please use no acl rule std-acl command. Standard-IP ACLs analyze and process data packets based on a series of match conditions, which can be the source IP addresses and destination IP addresses carried in the packets. Syntax acl rule std-acl {acl-id} {rule-id} [op { discard | permit }] [[sip source-ip] {smask source-ip-mask}] [[dip destination-ip] {dmask destination-ip-mask}] [tseg time-segment] no acl rule std-acl {acl-id} {rule-id} Parameter acl-id -- The desired Standard-IP ACL for configuration. rule-id -- The rule ID. op -- The operation for the switch to process packets which match the rules. There are two options, discard and permit. Discard means discarding packets, 142