TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 205
lldp med-fast-count, lldp admin-status
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Rx_Only) to Tx&Rx (or Tx_Only), the fast start mechanism will be enabled, that is, the transmit interval will be shorten to a second, and several LLDPDUs will be sent out (the number of LLDPDUs equals this parameter). The default value is 3. Command Mode Global Configuration Mode Example Specify the Transmit Interval of LLDPDU as 45 seconds and Trap message to NMS as 120 seconds: TP-LINK(config)# lldp timer tx-interval 45 TP-LINK(config)# lldp timer notify-interval 120 lldp med-fast-count Description The lldp med-fast-count command is used to configure the number of the LLDP-MED frames that will be sent out. When LLDP-MED fast start mechanism is activated, multiple LLDP-MED frames will be transmitted based on this parameter. The default value is 4. To return to the default configuration, please use no lldp med-fast-count command. Syntax lldp med-fast-count count no lldp med-fast-count Parameter count -- Configure the Fast Start Count parameter. It ranges from 1 to 10. By default, it is 4. Command Mode Global Configuration Mode Example Specify Fast Start Count as 5: TP-LINK(config)# lldp med-fast-count 5 lldp admin-status Description 192