TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 178
igmp-snooping static-entry-add
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
seconds. By default, it is 260. leave-time -- Leave Time, which is the interval between the switch reveiving a leave message from a host and the switch removing the host from the multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1. router-port -- Static Router Port, which is mainly used in the network with stable topology. Command Mode Global Configuration Mode Example Enable Multicast VLAN, and configure Router Port Time as 300 seconds, Member Port Time as 200 seconds, and Leave time as 15 seconds for VLAN 2: TP-LINK(config)# igmp-snooping multi-vlan-config enable 2 rtime 300 mtime 200 ltime 15 igmp-snooping static-entry-add Description The igmp-snooping static-entry-add command is used to create static multicast IP entry. To delete the corresponding entry, please use no igmp-snooping static-entry-add command. The multicast groups configured here are not learned by IGMP Snooping and independent of dynamic multicast groups and multicast filter. Multicast IP addresses ranges from 224.0.0.0 to 239.255.255.255. The range for receivers to join is from 224.0.1.0 to 239.255.255.255. Syntax igmp-snooping static-entry-add {ip} {vlan-id} {switch-port} no igmp-snooping static-entry-add {ip} {vlan-id} Parameter ip -- The static multicast IP address. vlan-id -- The VLAN ID of the multicast IP, ranging from 1 to 4094. switch-port -- The forward port of the multicast group, in the format of 1-3,6. Command Mode Global Configuration Mode Example Add static multicast IP address 225.0.0.1, which correspond to VLAN 2, and 165