TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 157
acl policy policy-add
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
source-ip-mask -- The source IP address mask. It is required if you typed the source IP address. destination-ip -- The destination IP address contained in the rule. destination-ip-mask -- The destination IP address mask. It is required if you typed the destination IP address. time-segment -- The time-range for the rule to take effect. By default, it is not limited. index -- Change the index number of the entry. Command Mode Global Configuration Mode Example Edit Rule 10 for the Standard-IP ACL whose ID is 120. In the rule, the source IP address is 192.168.0.100, the source IP address mask is 255.255.255.0, the time-range for the rule to take effect is tSeg1, and the packets match this rule will be forwarded by the switch: TP-LINK(config)# acl edit rule std-acl 120 10 op permit dip 192.168.0.100 dmask 255.255.255.0 tseg tSeg1 acl policy policy-add Description The acl policy policy-add command is used to add Policy. To delete the corresponding Policy, please use no acl policy policy-add command. A Policy is used to control the data packets that match the corresponding ACL rules by configuring ACLs and actions together for effect. The operations here include stream mirror, stream condition, QoS Remarking and redirect. Syntax acl policy policy-add name no acl policy policy-add name Parameter name -- The Policy Name, ranging from 1 to 16 characters. Command Mode Global Configuration Mode Example Add a Policy named policy1: 144