TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 185
SNMP Commands, snmp global
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 28 SNMP Commands SNMP (Simple Network Management Protocol) functions are used to manage the network devices for a smooth communication, which can facilitate the network administrators to monitor the network nodes and implement the proper operation. snmp global Description The snmp global command is used to configure the SNMP function globally. To return to the default configuration, please use no snmp global command. Syntax snmp global [status { disable | enable }] [engine-id engine-id] [remote-id remote-id] no snmp global Parameter status -- Enable/ Disable the SNMP function. By default, it is disabled. engine-id -- Local Engine ID for local clients. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the switch. Its length ranges from 10 to 64 hexadecimal characters, which must be even number meanwhile. remote-id -- Remote Engine ID for switch. The Engine ID is a unique alphanumeric string used to identify the SNMP engine on the remote device which receives traps and informs from switch. Its length ranges from 10 to 64 hexadecimal characters which must be even number meanwhile. Command Mode Global Configuration Mode Example Enable the SNMP function, and specify the Local Engine ID as 1234567890, the Remote Engine ID as 123456abcdef: TP-LINK(config)# snmp global status enable engine-id 1234567890 remote-id 123456abcdef 172