TP-Link TL-SG3424P TL-SG3424P V1 CLI Guide - Page 179
igmp-snooping filter-add, igmp-snooping filter-config
View all TP-Link TL-SG3424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
configure the forward port as port 1: TP-LINK(config)# igmp-snooping static-entry-add 225.0.0.1 2 1 igmp-snooping filter-add Description The igmp-snooping filter-add command is used to configure the multicast IP-range desired to filter. To delete the corresponding IP-range, please use no igmp-snooping filter-add command. When IGMP Snooping is enabled, you can specified the multicast IP-range the ports can join so as to restrict users ordering multicast programs via configuring multicast filter rules. Multicast IP addresses ranges from 224.0.0.0 to 239.255.255.255. The range for receivers to join is from 224.0.1.0 to 239.255.255.255. Syntax igmp-snooping filter-add {id} {start-ip} {end-ip} no igmp-snooping filter-add {id} Parameter id -- IP-range ID, ranging from 1 to 30. start-ip -- The start multicast IP of the IP-range. end-ip -- The end multicast IP of the IP-range. Command Mode Global Configuration Mode Example Add multicast IP-range 225.0.0.1~225.0.0.4 to filter, and specify the IP-range ID as 20: TP-LINK(config)# igmp-snooping filter-add 20 225.0.0.1 225.0.0.4 igmp-snooping filter-config Description The igmp-snooping filter-config command is used to modify the multicast filtering IP-range. Syntax igmp-snooping filter-config {id} {start-ip} {end-ip} Parameter 166