TRENDnet TPL210AP User's Guide - Page 17
DHCP Server, DHCP Server Start IP, DHCP Server End IP, Lease Time, Dynamic DHCP List - default ip
UPC - 710931506068
View all TRENDnet TPL210AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DHCP Figure 11. DHCP Server: Enabling DHCP server allows the 85Mbps Powerline Wireless Access Point to automatically assign IP addresses to devices connecting to the LAN. DHCP is disabled by default. DHCP Server Start IP: Enter an IP address to serve as the starting IP address that the DHCP server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline Wireless Access Point. DHCP Server End IP: Enter an IP address to serve as the ending IP address that the DHCP server will use to assign IP addresses to all LAN devices connected to the 85Mbps Powerline Wireless Access Point. Lease Time: The lease time specifies the amount of time a network user is allowed for their current dynamic IP address. Dynamic DHCP List: All dynamic DHCP client computers are listed in the table. The following information is shown for each DHCP client computer: Host name, IP address, MAC address and Expired Time. 11