Toshiba 26AV550E Owners Manual - Page 13

Getting started • If you want to close the menu display instantly, press EXIT. • To return to the previous menu, press MENU. • The U/ u function as the Program position PB/ Pb when there is no menu display on the screen. • The I/ i function as the Volume 2+/2- when there is no menu display on the screen. • In the PC input mode, PC Settings appears in the SETUP menu (- page 30). • In the 480i or 576i input signals mode, you can select the Cinema Mode in the PICTURE menu (- page 19). • When you use the color management function (- page 19), you can select the Base color adjustment in the PICTURE menu. Note: The program position selection change between different format channels takes several seconds. Switching between two program positions You can switch two program positions without entering actual position number each time. 1 Select the first program position you want to view. 2 Select the second program position with the Number buttons (0-9). 3 Press . The previous channel will be displayed. Watching TV programs Selecting the menu language Choose from 9 different languages (English, Chinese (CS), Malay, Thai, Vietnamese, Russian, Arabic, Persian or French) for the on-screen display. 1 Press MENU, then press I or i to display SETUP menu. SETUP Language Auto tuning Manual tuning AV connection Picture Position English OK OK OK OK MENU Back EXIT Watch TV 2 Press u or U to select Language. 3 Press I or i to select the desired language. Changing the program position 1 Enter the desired program position number using the Number buttons on the remote control. For program positions below 10, use 0 and the required number e.g., for program position 1. Each time you press , the TV will switch back and forth between the two program positions. Displaying the on-screen information 1 Press CALL to display the following on- screen information. 4 ABCD Stereo The information will disappear in 6 seconds. • Program position or external input mode selected • Program skip on/off information • Label (if set) • Mono/Stereo/Dual audio status 2 To erase the display instantly, press CALL again. 2 You can also change the program position by using PB or Pb. The program position will be displayed on the screen with the Mono/Stereo/Dual audio status. 13