Toshiba 26AV550E Owners Manual - Page 14

Getting started Programming channels into the TV's channel memory • First, use the Auto tuning function to preset all the active channels in your area automatically. Then, arrange the preset channels with the Manual tuning function so that you can tune into only desired channels. • Use the Manual tuning operation if desired channels cannot be preset with the Auto tuning or if you would like to preset channels to specific position numbers one by one. Programming channels automatically 1 From the SETUP menu, press u or U to select Auto tuning. 2 Press Q to start the automatic search. The search will begin for all available stations. Searching Pos : 02 EXIT Stop Auto tuning The slide bar will move along the line as the search progresses. If you make a mistake, simply repeat steps 1-2 to start again from the beginning. 3 When the automatic search is completed, the TV will automatically return to the first program position. 4 Press PB or Pb to view the programmed position. Note: When you preset the program channel which sound of broadcast transmission system adopts "M" system, the sound system may not be tuned correctly if the radio waves transmit badly. At that time, preset the channel by Manual tuning. The countries such as Myanmar, Brazil, Chile, Colombia apply to this case. See page 33 for more details. 14 Manually setting channels in the channel memory 1 From the SETUP menu, press u or U to select Manual tuning. 2 Press Q to display the Manual tuning menu. Press u or U to select the program position you want to arrange. Prog. 1 2 3 4 5 6 Manual tuning Label OK Select MENU Back Sort EXIT Watch TV 3 Press Q to display the breakdown menu. Press I or i to select an item, then press u or U to select the item as shown below. Manual tuning Program 1 B/G A OK Store MENU Back EXIT Watch TV A CE G BD F A. Program position selection B. Sound system (- page 33) C. Color system (- page 33) A : Automatic (factory set), P : PAL, S : SECAM, N4 : NTSC 4.43 (MHz), N3 : NTSC 3.58 (MHz) If the color of a certain channel is abnormal, the automatic color system selection (A) may have malfunctioned, or sound system selection is wrong. In such a case, select another color and/or sound system (- page 33). D. Program position skip selection Press u or U to turn the program position skip option on "8" or off "(". The program position will then be skipped when you select channels with PB or Pb. The "8" mark will appear beside a program position number when you use the Number button on the remote control. E. Channel search operation Press U to search up the band or u to search down the band. Press u or U repeatedly until your desired channel is displayed. When a station/satellite is found, it will be displayed. NEVER PRESS ANY OTHER BUTTONS WHILE THE SET IS TUNING.